Best Practices | Fiber Optic Cleaning!

This is really worth watching. The knowledge shared is good guidance for cleaning challenges. Endface maintenance is simply defined as inspecting and clean and inspect until end-face analysis is accepted.

Stickler's Cleaning Products are available at your favorite West Coast DISTY; EBAY; Google; or Factory Direct @ FiberRep

POC03M WET/DRY CLEAN

Cleanclicker Wet/Dry

Cleanclicker Wet/Dry

Cleanstixx Wet/Dry

• Wet-dry cleaning is most effective for removing most forms of contamination and eliminates electrostatic charge.
• Use optical-grade cleaning fluids that leave no residue and are fast-evaporating.
• Always clean both ends of a connector pair, and do it just before mating.
• Inspect new jumpers and patch cords right out of the bag. Inspect when they have protective dust covers too.
• Use one stick per end face to avoid cross-contamination when using Cleanstixx swabs cleaners,
• When using Cleanstixx Swabs rotate them in one direction. Normally four to five rotations are good.
• When using mechanical “push-to-clean” cleaners and cassette cleaners combine wet/dry cleaning to dissipate static

 

*** Inspect, Clean, and Re-Inspect ... 100% Spec Compliance ***

 

Visit Wet/Dry Cleaning Solutions for adapter cleaning and end-face Cleaning for more product info.

or more of "My World" for more application notes. Use the MENU Above ... Email or call if you have questions.