ASR-24 Fiber Stub Removal (Stand-alone)

MSRP: $5,995.00

Description

2.5mm

1.25mm

(works with most existing fixtures)

(Custom Holding Fixtures are available)

**Talk to us about your V-Groove applications

MT

2.5mm 

1.25mm

1.6mm

1.58mm

3mm SMA

29504 (most)

E2000

Titanium Ferrules

Radiall Lexcis

Biconic

(Custom Oven Blocks are available)

Senko CS

Senko SN

USConec MDC

MT/MPO

LC/Duplex 1.25mm

ST/SC/FC 2.5mm

UPC/PC/APC

29504 (most)

V-Groove 0/6/8/10 deg

Radiall Luxis

TFOCA

SMA

E2000

(Check Plate List for more)

Introducing the ASR-24 Fiber Stub Removal System

• Easy to use

• Remove 24++ fiber stubs at a time

• Utilizes touchscreen technology for easy use

• Programmable RPM Ramp Generator for controlling motor speed

• Available for most connector types

• Takes less than 35 seconds to remove 24 fiber stubs (minus load time)

No more removing fiber stubs by hand!

Made In USA (Since 1993)

Works Great with... ACP24/96 Fiber Optic Polisher & 5G Smart Fiber Optic Curing Oven

..... for further information contact

Frank Bertotti
FiberRep ... Knowledge, Service & Support!
805-748-7790
fjb@bertotti.org

West Coast Manufacturer's Exclusive Representative

PolishingCleaningInterferometryInspection

 

ACP-24/96 Nanometer Fiber Optic Polishers

Why use the ACP24/96 Polisher?

Nanometer Technologies was born through research at NASA’s Jet Propulsion Labs in Pasadena Ca. Our first product was a variable fiber optic attenuator.

Mike Buzzetti designed the attenuator during the early 1990s. It was of the bent fiber type (light loss by bending of fiber) and was subsequently patented by Mike Buzzetti, and CAL TECH/NASA Mike Buzzetti then obtained a license for this patent and started Nanometer Technologies.

Since its inception in 1993, Nanometer Technologies has developed and produced a line of innovative products including a complete line of fiber optic polishers starting with the industries first patented figure 8 polisher.

ACP24/96 Process Control Fiber Optic Polishing

ACP24/96 Automates Processes

With the ACP24/96 you can now automate polishing times, pressure, & motor speeds for each step. Complete polishing procedures are stored inside of the ACP24/96 to save time and ensure repeatability.

Auto Stub Removal Fiber Optic Connectors

ACP24/96 Auto Stub Removal

Remove up to 96 fiber stubs at a time
Utilizes touchscreen technology for easy use
Programmable RPM Ramp Generator for controlling motor speed
Less than 35 seconds to remove 24 fiber stubs (minus load time)
No more removing fiber stubs by hand!
Available for all connector types

Nanometer 96 connector Fiber Optic Polisher

ACP24/96 High Volume Fixture Plating 24/48/96

Nanometer Technologies manufactures polishing fixture plates for all major fiber optic connectors. We also manufacture custom fixture plates to meet your customers' needs.  

All MCP 24/48/96 Fixture Plates are compatible with the ACP 24/96 polisher.

Nanometer Patented Figure 8 Polisher

ACP24/96 Nanometer Patented Figure 8 Polishing

All Nanometer Tech line of polishers utilizes our patented figure 8 polishing pattern. The figure 8 polishing pattern creates an angle of attack on the connector end face that changes 720 degrees 60 times a second giving optimal connector end face geometry.

Fiber Optic Polishing Yields & Repeatability

ACP24/96 Yields

ROC = 7-30mm

Apex Offset = <50uM

Undercut/Protrusion = 50Nm

Back Rlection

PC = 45db

UPC = -55dB

APC = -65dB

Multi-Mode = -35dB

G5 SMART OVEN MT-24 Fiber Optic Curing Oven

Cure 24 Connectors At A Time

G5 SMART OVEN Fiber Optic Curing Oven for 24 Connectors at a Time.  A built-in alarm system helps prevent over-curing your connectors.

Fiber Optic Curing Oven

Horizontally Positioned Heating Block

The "easy to use" horizontally positioned heating block will hold 24 MT style connectors.  Also, works with most 2.5 & 1.25 Ferrules and custom applications  

G5 SMART OVEN MT-24 Fiber Optic Curing Oven

Precise Controls

The G5 SMART OVEN process controller enables repeatable performance with accurate temperature control.

G5 SMART OVEN MT-24 Fiber Optic Curing Oven

Touch Screen

7-inch touch screen with 30 recipes for storing all major Mfg epoxy cure times/temps. Ensure accurate, repeatable performance.  Ramp/Soak function for Mil-Spec applications 

G5 SMART OVEN MT-24 Fiber Optic Curing Oven

30 Temperature Profiles

The 4.3” touch screen PID process controller enables repeatable performance with accurate temperature control. Store up to 30 temperature profiles and epoxy types.

ACP-96 Mass connector Polisher fiber optic polisher Specifications

Works Great with ACP24/96 polisher

G5, ACP24/96 position fiber optic polisher with ASR automatic fiber stub removal  Eliminates errors common with manual fiber stub removal.  30 recipe storage USB backup/transfer.

×