FOCP-1 Polishing Kit (Fiber Optic Polisher)

Description

FOCP-1 Field Connector Polisher

Upgrade your back reflection from -38db to -58db within seconds.

FOCP-1 Polishing Kit contains the following products:

  • FOCP-1 polisher
  • 2 hand pucks of your choice
  • 6″x6″ glass
  • 6″x6″ rubber sheet
  • UPS-1 polishing solution
  • 6 micron 3M diamond lapping film (10 sheets)
  • 3 micron 3M diamond lapping film (10 sheets)
  • 1 micron 3M diamond lapping film (10 sheets)

 

FOCP Upgrade your back reflection from -38db to -58db within seconds.

FOCP Upgrade your back reflection from -38db to -58db within seconds.

FOCP-1 Field Polisher

Advantages

Upgrade your back reflection from -38db to -58db within seconds.

This product is based upon the exclusive final polishing process that we designed for our Mass production polishers. It is utilized in the field and in the lab as a final “touch up” polisher.

• This product will lower back reflection from -38db to -58db in a matter of 5-8 seconds

• It accommodates most 2.5mm and 1.25mm connectors.

• Rechargeable DC power source.

The FOCP-1 will also reduce any micro scratches on the end face of the connector. It also works very well to clean the end face of any connector that has any minor flaws.

Features

•  Nicad Battery Operation

•  10 Second Timer

•  Battery Charger

•  Built-in Puck Assembly

•  FC, SC, ST, and LC Compatible

•  Replaceable Polishing Pads

•  Durable Package

Dimensions: 6 3/4″ x 4 3/4″ x 2 3/8″

Why use the Nanometer Fiber Optic Polishing Technology?

Nanometer Technologies was born through research at NASA’s Jet Propulsion Labs in Pasadena Ca. Our first product was a variable fiber optic attenuator.  Mike Buzzetti designed the attenuator during the early 1990s. It was of the bent fiber type (light loss by bending of fiber) and was subsequently patented by Mike Buzzetti, and CAL TECH/NASA Mike Buzzetti then obtained a license for this patent and started Nanometer Technologies.  Since its inception in 1993, Nanometer Technologies has developed and produced a line of innovative products including a complete line of fiber optic polishers starting with the industries first patented figure 8 polisher.

 

….. for further information contact

Frank Bertotti
FiberRep … Knowledge, Service & Support!
805-748-7790
fjb@bertotti.org

West Coast Manufacturer’s Exclusive Representative

PolishingCleaningInterferometryInspection

Share via